Dimensions [W x D]: 0.5 x 2 m
Heating area: 1 m2
Power: 170W
Current: 0.7A
Resistance: 287...388 Ω
Cable length: 10.2 m
Cable type: Two-core
Power supply: ~230V
Specific power at nominal voltage: 170 W/m²
Maximum operating temperature: +90⁰С
Minimum installation temperature: -10⁰С
Cable outer diameter: 3.6 mm
Mat thickness: 3.8 mm
Mat mesh width: 50 cm
Installation wire supplying the heating mat: 3.0m, PVC 3x1.0mm²
Wire color: brown - phase (L), blue - zero (N), yellow-green - "ground" (PE)
The two-core electric heating mat “Grand Meyer® EcoNG170” is designed for comfortable floor heating in any type of premises. It can be used under any surface: ceramic tiles, marble, linoleum or carpet. It is installed both on a new floor base and on an existing floor during the renovation of the premises, when it is very important to maintain a small thickness of the floor base.
Heating cable construction
1. Heating wires. Made of CuNi, CuCr, NiCr alloys depending on the resistance.
2. Internal insulation made of heat-resistant cross-linked new generation polyethylene XPLE.
3. Aluminum foil screen.
4. Drainage conductor made of twisted Al-Mg wires.
5. External insulation made of PVC modified polyvinyl chloride with increased heat resistance.
6. Synthetic fiberglass mesh 50 cm wide.
7. Connection.
8. Cold lead 3.0 m long.
A. The thickness of the heating cable is only 3.6 mm, which allows the use of the minimum thickness of tile adhesive.
B. The heating cable is securely sewn to an ultra-thin and durable synthetic mesh, the thickness of which is only 0.2 mm, which does not deform when laid.
Included
Heating mat EcoNG170
Corrugated pipe made of self-cooling PVC with a plug for a temperature sensor
System installation instructions
Warranty card
Get a free sample 
Request a custom quote for large quantities 
this product is currently browsing 7 people 
Facebook 
Instagram 
YouTube 
TikTok