Description
A primer based on a small molecular acrylic dispersion, does not contain organic solvents. Intended for strengthening porous mineral substrates – concrete, aerated concrete, plaster, brick, gypsum board, etc. – before plastering, puttying, wallpapering, tiling or painting. The primer penetrates deeply into the substrate, strengthens loose and chalky surfaces, reduces water absorption and improves the adhesion of finishing materials. Any type of finishing coat can be applied to primed surfaces. The product is moisture-resistant and at the same time water vapor-permeable, which helps maintain an optimal microclimate in the rooms.
Surface preparation, application
The substrate must be dry, clean, free of dust, oil or grease. The primer must be thoroughly mixed before use. It is recommended to prime highly absorbent or weak surfaces several times, without waiting for the previous layer to dry completely – this will ensure uniform surface strengthening. Further finishing work (puttying, tiling, wallpapering, painting) may be carried out only after the primer has completely dried. Drying time – 4 to 6 hours depending on the ambient temperature and humidity.
Product features:
• Penetrates deeply into the surface
• Strengthens the base and prevents crumbling
• Reduces moisture absorption
• Improves adhesion to finishing materials
• Contains antiseptic additives
• Moisture-resistant and vapor-permeable
• Suitable for interior and exterior use